現在位置首頁 > 博碩士論文 > 詳目
論文中文名稱:營造廠施工BIM模型協同作業管理模式與機制之研究 [以論文名稱查詢館藏系統]
論文英文名稱:Developing BIM Collaboration Management Models for General Contractor in Construction [以論文名稱查詢館藏系統]
院校名稱:臺北科技大學
學院名稱:工程學院
系所名稱:土木工程系土木與防災博士班
畢業學年度:106
畢業學期:第一學期
出版年度:107
中文姓名:楊慧萱
英文姓名:Hui-Hsuan Yang
研究生學號:102429006
學位類別:博士
語文別:中文
口試日期:2018/01/18
論文頁數:203
指導教授中文名:林祐正
指導教授英文名:Yu-Cheng Lin
口試委員中文名:曾惠斌;陳鴻銘;李欣運;黃盈樺
中文關鍵詞:BIM建築資訊模型協同作業管理模型檢核
英文關鍵詞:BIMBuilding information modelingCollaboration managementModel inspection
論文中文摘要:建築資訊模型(Building Information Modeling,BIM)是目前國內營建產業新興的一種技術,應用在營建生命週期各階段裡,是未來發展趨勢。國內營造廠紛紛導入BIM 技術於專案,且建置模型作業模式常以協同作業方式進行,以縮短作業時程,但在國內目前尚未有相關的BIM 模型作業準則與管理機制,因此營造廠欲利用協同作業分工模式執行BIM專案,若沒有制定相關的BIM 模型作業準則及相關配套的作業程序與管理機制,容易造成作業相互影響、重工等現象,進而造成作業時間反增不減的情況,另外BIM模型之品質及正確性對於BIM專案的執行是相當中重要的,而以往建置BIM模型時即常因為人為或標準之問題而導致BIM模型品質不一,欲利用此BIM模型進行後續作業時將會有疑慮,因此除了制定BIM模型協同作業準則,尚須透過模型檢核機制及權限設定管理確保BIM模型品質與正確性。故本研究探討分析目前國內營造廠執行BIM模型協同作業管理所遭遇的問題,並透過相關文獻探討,針對其遭遇問題提出改善目前問題的BIM模型協同作業管理之模式與機制,訂定相對應之BIM模型作業標準,並建立模型檢核機制作為輔佐之管理機制,改善協同作業上碰到的模型品質不一問題,並透過BIM模型版本備份更新管理機制,確保BIM模型維持最新狀態,最後透過案例導入與修正,建置一套適用營造廠BIM模型協同作業管理模式,確保品質的正確性,供未來BIM 發展協同作業程序與規範之參考。
論文英文摘要:In recent years, the uses and applications of building information modeling (BIM) have become more common in construction projects. Usually, most general contractors (GCs) will use collaborative works for BIM model creation. GCs work together and complete BIM model creation at different locations and times, successfully reducing the duration of BIM model creation. However, BIM collaborative works cause numerous practical problems in BIM model creation, which include low quality BIM models, the need to rework the model creation, and incorrect model creation. To overcome these problems, this study proposes the BIM collaboration management (CM) framework to enhance the quality of BIM model creation work. Using the proposed BIM CM approach, the BIM team can reduce the time needed for model checking and improve the quality of BIM CM work. The proposed framework and approaches were applied to a case study of a building project in Taiwan to verify their effectiveness. The case study results show that the proposed frameworks and approaches are effective for collaborative BIM model creation for the GCs. Finally, the benefits, limitations, conclusions, and suggestions are summarized for further application.
論文目次:目 錄

摘 要 i
ABSTRCT iii
誌 謝 v
目 錄 vii
表目錄 ix
圖目錄 x
第一章 緒論 13
1.1 研究動機 13
1.2 研究目的 14
1.3 研究範圍 15
1.4 研究方法 15
1.5 研究流程 16
第二章 文獻回顧 17
2.1 協同作業介紹 17
2.2 建築資訊模型技術 18
2.3 BPMN與IDEF0方法介紹 25
2.4 BIM協同作業之相關文獻 31
第三章 BIM協同作業規劃模式之建置 36
3.1 BIM專案之初期規劃 46
3.2 BIM專案之執行作業組織模式探討 52
3.3 BIM專案之模型分解結構 56
3.4 小結 60
第四章 BIM協同作業執行模式之建置 62
4.1 BIM模型作業之規劃 68
4.1.1 BIM模型作業人員組織規劃 71
4.1.2 初始作業規劃 74
4.1.3 模型初始檢核 85
4.2 BIM模型作業之建置 87
4.3 BIM模型作業之檢核 95
4.3.1 模型自主檢核 97
4.3.2 模型覆查檢核 104
4.4 BIM模型作業之整合 115
4.5 BIM模型現場問題反饋 120
4.6 BIM模型作業之版本管理 125
4.7 小結 131
第五章 案例導入 133
5.1 案例介紹 133
5.2 案例導入說明 134
5.2.1 教學大樓協同作業規劃模式之應用 134
5.2.2 教學大樓協同作業執行模式之應用 140
5.3 案例分析與討論 158
5.4 小結 170
第六章 結論與建議 171
6.1 結論 171
6.2 建議 172
6.3 研究貢獻 173
參考文獻 175
論文參考文獻:[1] Houghton Mifflin Harcourt Publishing Company, 2011, American Heritage Dictionary of the English Language, Fifth Edition, Houghton Mifflin Harcourt.
[2] Gray, B., 1990, “Collaborating: Finding Common Ground for Multiparty Problems”, The Academy of Management Review, 15(3), 545-547.
[3] London, S., 1995, “Collaboration and Community”, Richmond, VA: Pew Partnership for Civic Change, University of Richmond.
[4] AIIM網站,來自http://www.aiim.org/What-is-Collaboration#,2017年4月。
[5] Wilknson, P., 2005, Construction Collaboration Technologies: An Extranet Evolution, London: Routledge.
[6] Payneni, K., 2016, BIM specifics: an illustrative guide to implement building information modeling, Createspace Independent Pub.
[7] Eastman, C., Teicholz, P., Sacks, R. and Liston K., 2011, BIM Handbook: A Guide to Building Information Modeling for Owner, Managers, Designers, Engineers and Contractors, 2nd Edition, John Wiley & Sons, Inc., U.S.A.
[8] Smith, D., 2007, “An Introduction to Building Information Modeling (BIM)”, Journal of Building Information Modeling, Fall 2007, 12-14.
[9] 劉聰熙、謝定亞,BIM世代的營建管理,中國土木水利工程學會會刊第三十七卷,第五期,2010,第31~36頁。
[10] 郭榮欽、謝尚賢,BIM概觀與國內推行策略,中國土木水利工程學會會刊,第三十七卷,第五期,2010,第8~20頁。
[11] Eatman, C.M., 1999, Building Product Models: Computer Environments Supporting Design and Construction,CRC Press, Inc. Boca Raton, FL, USA.
[12] Yessios C. I., 2004, “Are We Forgetting Design? ” , AEC bytes viewpoint, April 2017.
[13] thebimhub網站, 來自https://thebimhub.com/2015/08/25/bim-for-project-managers-workflows-roles-and-deliv/#.WPm1QvmGOUl,2017年4月。
[14] Moon, H., Kim, H., Kamat, V. R., and Kang, L., 2015, “BIM-Based Construction Scheduling Method Using Optimization Theory for Reducing Activity Overlaps.”, Journal of Computing in Civil Engineering, 29(3), 04014048.
[15] Hanna, A., Boodai, F., and El Asmar, M., 2013, “State of Practice of Building Information Modeling in Mechanical and Electrical Construction Industries.”, Journal of Construction Engineering and Management, 139(10), 04013009(8).
[16] Ospina-Alvarado, A. M. and Castro-Lacouture, D., 2010, “Interaction of Processes and Phases in Project Scheduling Using BIM for A/E/C/FM Integration”, Construction Research Congress, May 8-10, 2010, Banff, Alberta, Canada, 939-948.
[17] Korman,T. M., Simonian, L. and Speidel, E., 2008, “Using Building Information Modeling to Improve the Mechanical, Electrical, and Plumbing Coordination Process for Buildings.”, Architectural Engineering Conference, September 24-27, 2008, Denver Colorado, United States.
[18] Goedert, J. D., 2008, “Integration Construction Process Documentation into Building Information Modeling”, Journal of Construction Engineering and Management, Vol.134(7), 509-516.
[19] Sacks, R., 2010, “Requirements for Building Information Modeling Based Lean Production Management System for Construction”, Automation in Construction, Vol.19(5), 641-655.
[20] Popov, V., 2009, “The Use of a Virtual Building Design and Construction Model for Developing an Effective Project Concept in 5D Environment”, Automation in Construction, Vol.19(3), pp.357-367.
[21] Succar, B., 2009, “Building Information Modeling Framework: A Research and Delivery Foundation for Industry Stakeholders”, Automation in Construction, Vol.18(3), 357-375.
[22] Charalambides, J., 2009. “Improving Energy Efficiency in Building through Automated Computer Design Process”, Construction Research Congress, April 5-7, 2009, Seattle, Washington, United States, 628-635.
[23] Pooyan, A., Griffis, F. H. and Lawrence, C., 2009, “Building Information Model: The Role and Need of the Constructors”, Construction Research Congress, April 5-7, 2009, Seattle, Washington, United States, 467-476.
[24] Leite, F., 2011, “Analysis of Modeling Effort Impact of Different Levels of Detail in Building Information Models”, Automation in Construction, Vol.20(5), 601-609.
[25] Tang, P., 2010, “Automatic Reconstruction of As-built Building Information Models from Laser-scanned Point Clouds: A Review of Related techniques”, Automation in Construction, Vol.19(7), 829-843.
[26] Barlish, K. and Sullivan, K., 2012, “How to Measure the Benefits of BIM – A Case Study Approach”, Automation in Construction, Vol.24, 149-159.
[27] Olatunji, O.A., and Sher, W.D., 2010, “The Applications of Building Information Modelling in Facilities Management”, Handbook of research on building information modeling and construction informatics: concepts and technologies, Idea Group Inc (IGI), 239-253.
[28] Popov, V., Juocevicius, V., Migilinskas, D., Ustinovichius, L. and Mikalauskas, S., 2010, “The Use of A Virtual Building Design and Construction Model for Developing An Effective Project Concept in 5D Environment”, Automation in Construction, Vol.19(1), 66-72.
[29] Becerik-Gerber, B., Jazizadeh, F., Li, N. and Calis, G., 2012, “Application Areas and Data Requirements for BIM-enabled Facility Management”, Journal of Construction Engineering and Management, Vol.138(3), 431-442.
[30] NBIMS, 2015, “National Building Information Model Standard-United States Version 3 (NBIMS-US V3)”, National Institute of Building Sciences.
[31] Construction Industry Council, 2013, “Building Information Modelling (BIM) Protocol”, CIC/BIM Pro, UK.
[32] The AEC (UK) Standard Committee, 2015, “AEC (UK) BIM Technology Protocol: Implementing UK BIM Standards for the Architectural, Engineering and Construction industry”, Version 2.1.1, UK.
[33] Building and Construction Authority, 2013, “Singapore BIM Guide”, Version 2.
[34] British Standards Institution, 2008, “BS 1192:2007- Collaborative Production of Architectural, Engineering and Construction Information”, Code of practice – BSI British Standards, London.
[35] BPMI:Business Process Modeling Notation, Version 1.0, May 2004。
[36] Object Management Group,來自
http://www.omg.org/gettingstarted/gettingstartedindex.htm, 2016年6月。
[37] BPMN官方網站,來自http://www.bpmn.org/,2018年1月。
[38] 鍾峰宜,BPMN在企業模型設計之應用,M-Power Co., Ltd,2005。
[39] 王嘉玲,CALS 之模型分析方法--IDEF,ARIS與OOA/OOD,中岡科技,http://www.ixon.com.tw/Products/IDEF/IDEF%20Content.htm#CALS。
[40] 林于新,以企業流程模型導向實施資料庫重構之研究-以S公司為例,碩士論文,國立政治大學資訊管理研究所,台北,2009。
[41] 張景文,以IDEF及PetriNets建構同步設計流程控制模式,碩士論文,朝陽科技大學工業工程與管理系碩士班,台中,2000。
[42] 李海崧,IDEF0整合分析模式應用於營造業品管之初步研究-以檢驗、量測與試驗設備管制程序為驗證範例,碩士論文,中華大學建築與都市計畫學系碩士班,新竹,2000。
[43] Mayer, R.J., 1992, “IDEF0 Function Modeling” Knowledge Based Systems, College Station Texas.
[44] 郭鴻志、季延平,系統分析與設計:由自動化到企業再造,臺北市:華泰,第一版,1995。

[45] Gu, N., Singh, V., London, K., Brankovic, L. and Taylor, C., 2008, “Adopting Building Information Modeling (BIM) as Collaboration Platform in the Design Industry”, Computer Aided Architectural Design Research, 9–12 April 2008, Chiang Mai , Thailand, 1-8.
[46] Dossick, C. S., Neff, G. and Homayouni, H., 2009, “The Realities of Building Information Modeling for Collaboration in the AEC Industry”, Construction Research Congress, 9–12 April 2009, Seattle, Washington, 396-405.
[47] Kuprenas, J. A. and Mock, C. S., 2009, “Collaborative BIM Modeling Case Study -Process and Results”, Computing in Civil Engineering, 24–27 June 2009, Austin, Texas,pp. 431-441.
[48] Li, Z. and He, D., 2013, “Discussion of a Method of Collaborative Construction Project Information Management based on BIM”, International Conference on Construction and Real Estate Management, 10–11 October 2013, Karlsruhe, Germany, 492-498.
[49] Shafiq, M.T., Matthews, J. and Lockley, S.R. 2013, “A Study of BIM Collaboration Requirements and Available Features in Existing Model Collaboration Systems”, Journal of Information Technology in Construction, Vol18, 148-161.
[50] Das, M., Cheng, J. and Kumar, S. S., 2014, “BIMCloud: A Distributed Cloud-based Social BIM Framework for Project Collaboration”, Computing in Civil and Building Engineering, 23–25 June 2014, Orlando, Florida, 41-48.
[51] Zada, A. J., Tizani, W. and Oti, A. H., 2014, “Building Information Modelling (BIM)-Versioning for Collaborative Design”, Computing in Civil and Building Engineering, 23-25 June 2014, Orlando, Florida, 512-519.
[52] Kassem, M., Iqbal, N., Kelly, G., Lockley, S. and Dawood, N., 2014, “Building Information Modelling: Protocols for Collaborative Design Processes”, Journal of Information Technology in Construction Vol.19, 126-149.
[53] Chen, H.M. and Hou, C.C., 2014, “Asynchronous Online Collaboration in BIM Generation Using Hybrid Client-server and P2P Network”, Automation in Construction, Vol.45, 72-85.
[54] Charalambous, G., Demian, P., Yeomans, S., Thorpe, T., Peters, C. and Doughty, N., 2012, “BIM and Online Collaboration Platforms–An Investigation into Emerging Requirements”, Engineering, Project, and Production Management, 10–11 September 2012, Brighton, 31-40.
[55] Shang, Z. and Shen, Z., 2014, “Critical Success Factors (CSFs) of BIM Implementation for Collaboration based on System Analysis”, Computing in Civil and Building Engineering, 23–25 June 2014, Orlando, Florida, 1441-1448.
[56] Munkley, J., Kassem, M. and Dawood, N., 2014, “Synchronous Building Information Model-Based Collaboration in the Cloud: a Proposed Low Cost IT Platform and a Case Study”, Computing in Civil and Building Engineering, 23–25 June 2014, Orlando, Florida, 89-96.
[57] Homayouni, H., Neff, G. and Dossick, C. S., 2010, “Theoretical Categories of Successful Collaboration and BIM Implementation within the AEC Industry”, Construction Research Congress, 8-10 May 2010, Banff, Alberta, Canada, 778-788.
[58] Isikdag, U., Underwood, J., 2010, “Two Design Patterns for Facilitating Building Information Model-based Synchronous Collaboration”, Automation in Construction, 19(5), 544-553.
[59] 寶琦,基於BIM的工業建築協同設計,工業建築,第S1期,北京,2010,第84-86頁。
[60] 石磊,BIM在中國移動國際信息港項目中的應用,工程質量,第1期,北京,2013。
[61] 郭俊禮、滕佳穎、吳賢國、曹靖、晏禕,基于BIM的IPD建設項目協同管理方法研究,施工技術,第22期,湖北武漢,2012。
[62] 滿慶鵬、李曉東,基於普適計算和BIM的協同施工方法研究,土木工程學報,第S2期,2012,第311-315頁。
[63] 黃超,基於BIM技術的建築協同工作平台的應用與設計,碩士論文,桂林理工大學,桂林,2013。
[64] 楊科、康登澤、車傳波、徐鵬,基於BIM的碰撞檢查在協同設計中的研究,土木建築工程信息技術,第五卷,第四期,2013。
[65] 蒲紅克,BIM技術在城市道路與管道協同規劃設計中的應用,城市道橋與防洪,第十一期,2013。
[66] 李雷、閆文凱,建築工程三維協同設計流程形式研究,土木建築工程信息技術,第五卷,第四期,2013。
[67] Liu, W., Guo, H. and Skitmore, M., 2014, “A BIM-Based Collaborative Design Platform for Variegated Specialty Design”, International Conference on Construction and Real Estate Management, 27-28 September 2014, Kunming, China, 320–329.
[68] Wu, Y. and Xu, N.,2014, “BIM Information Collaborative Framework Based on Supply Chain Management”, International Conference on Construction and Real Estate Management, 27-28 September 2014, Kunming, China,199-207.
[69] Merschbrock, C. and Munkvold, B. E., 2015, “Effective Digital Collaboration in the Construction Industry-A Case Study of BIM Deployment in a Hospital Construction Project”, Computers in Industry, Vol.73, 1-7.
[70] Oh, M., Leea, J., Hongb, S. W. and Jeong, Y., 2015, “Integrated System for BIM-based Collaborative Design”, Automation in Construction, Vol.58, 196-206.
[71] Liu, Y., Nederveen, S. V. and Hertogh, M., 2017, “Understanding Effects of BIM on Collaborative Design and Construction: An Empirical Study in China”, International Journal of Project Management, Vol.35(4), 686-698.
[72] 趙紅紅,信息化建築設計-Autodesk Revit,北京:中國建築工業出版,2005。
[73] BuildingSMART, 2016, http://buildingsmart.com/,2016年3月17日。
[74] 陳振宏,整合IFC於BIM資料擷取與檢核之研究,碩士論文,國立臺北科技大學,台北,2013。
[75] Autodesk,來自
https://www.cadstudio.cz/dl/ipd_workflow.pdf,2017年7月。
[76] 衛武資訊,來自:
http://webim.com.tw/sharing/bim-collaboration-current-situation/2016年6月。
[77] 邱垂德、鄭紹材、余文德、劉得廣、曾楷婷、張育晧,我國BIM協同作業指南之研訂―設計與施工階段資訊交換,內政部建築研究所,2015。
[78] 謝尚賢,「淺談BIM 應用工具(四):協同作業」,營建知訊期刊,第362 期,第58-61頁,2013。
[79] Woddy, P. & Revit Sub-Committee Chair, 2010, “AEC (UK) BIM Standard for Autodesk Revit”, Version 1.0, UK.
[80] 裴謄兆,建築空間資訊模型在維護管理上的應用,國立臺灣大學土木工程學系工程資訊模擬與管理研究中心技術報告,2010。
[81] 謝尚賢、郭榮欽、陳以文、劉以晨,透過案例演練學習BIM: 機電篇,國立臺灣大學出版中心,2015
[82] 黃隆茂,BIM的施工管理,臺灣建築學會會刊雜誌,第81期,2016,40-47。
[83] 周鴻霖,建築資訊模型(BIM)於營造施工階段之介面衝突檢討研究-以鋼骨構造大樓為例,碩士論文,國立臺灣海洋大學,台北,2015。
論文全文使用權限:不同意授權