現在位置首頁 > 博碩士論文 > 詳目
  • 同意授權
論文中文名稱:纖維棒應用於梁構件力學行為與耐久性之研究 [以論文名稱查詢館藏系統]
論文英文名稱:A Study on the Flexural Reinforced Concrete Beams with FRP Bars and Durability [以論文名稱查詢館藏系統]
院校名稱:臺北科技大學
學院名稱:工程學院
系所名稱:土木與防災研究所
中文姓名:羅國軒
英文姓名:Kuo-Hsuan Lo
研究生學號:94428048
學位類別:碩士
語文別:中文
口試日期:2007-07-10
論文頁數:124
指導教授中文名:李有豐;林至聰
指導教授英文名:Yeou-Fong Li;Jhih-Tsung Lin
口試委員中文名:趙文成;陳清泉
口試委員英文名:Wun-Chen Jau;Ching-Cyuan Chen
中文關鍵詞:RC梁鋼筋混凝土 耐久性
英文關鍵詞:FRP BarFlexural Concrete BeamDurability
論文中文摘要:本文使用兩種高分子複合材料分別為:碳纖維高分子複合材料(Carbon Fiber Reinforced Plastics, CFRP)製成之碳纖維棒,以及玻璃纖維高分子複合材料(Glass Fiber Reinforced Plastics, GFRP) 製成之玻璃纖維棒。試驗第一部份為討論利用GFRP棒應用於混凝土梁構件中,探討其梁受力後之破壞模式以及受力行為,且將ACI 440單筋梁設計、修正ACI 440雙筋梁設計與GFRP梁試體之實驗值進行比較,提出一合理之設計公式。第二部份為將碳維棒進行握裹試驗,試驗變數分別為握裹長度、混凝土設計強度。試驗之結果用以了解CFRP棒與混凝土塊握裹之行為模式,並且提出一合理之握裹長度以供工程師參考。第三部份為使用CFRP棒與GFRP棒分別進行耐久性試驗,耐久性試驗之內容包括紫外線照射試驗、恆溫恆濕試驗以及耐酸鹼試驗,試驗之結果可供往後工程師設計之參考資料。
論文英文摘要:In this thesis, glass fiber reinforced plastics (GFRP) bar was used to replace the reinforcement in RC beam. Three different concrete strengths and two different types of scaled-down RC beams were used in the four-point bending test. According to the ACI 440 and ACI 318 codes, a modified design method was proposed for RC beam with GFRP bars. Carbon fiber reinforced plastics (CFRP) bar with three different concrete strengths and six embedment lengthes were used in the pullout test to obtain the relationship between the debonding strength and concrete strength and embedment length. Finally, CFRP bar and GFRP bar were used under different conditions (such as emgerging in high chloride liquid, exposing in UV light and changing the temperature and humidity) to obtain the durability of the composite bars.
論文目次:中文摘要 i
英文摘要 ii
誌謝 iii
目錄 iv
表目錄 vii
圖目錄 ix
第一章 緒論 1
1.1 研究背景 1
1.2 研究動機與目的 2
1.3 文獻回顧 5
第二章 試驗規劃 14
2.1 GFRP梁試驗規劃 14
2.1.1 GFRP梁試驗規劃 14
2.1.2 GFRP梁製作 16
2.1.3 GFRP梁試驗設備及步驟 28
2.2 CFRP棒握裹試驗規劃 30
2.2.1 CFRP棒握裹試驗規劃 30
2.2.2 CFRP棒握裹試體製作 31
2.2.3 CFRP棒握裹試驗設備及方法 39
2.3 CFRP棒與GFRP棒耐久試驗規劃 41
2.3.1 耐鹼 (pH)試驗 41
2.3.2 紫外線照射試驗 42
2.3.3 溫濕循環試驗 47
2.3.4 耐久性試體編號 49
第三章GFRP梁試驗結果 51
3.1 試體梁破壞行為 51
3.1.1 設計強度210 kgf/cm2試體破壞情形 51
3.1.2 設計強度280 kgf/cm2試體破壞情形 63
3.1.3 設計強度350 kgf/cm2試體破壞情形 72
3.2 試體梁試驗結果討論 83
3.2.1 相同混凝土強度下梁極限載重強度之比較 83
3.2.2 相同混凝土強度下梁變型量之比較 84
3.2.3 ACI規範驗證GFRP梁 87
第四章 碳纖維棒握裹試驗結果 93
4.1 握裹試體試驗破壞情形與結果 93
4.2 握裹試體試驗公式推導 102
第五章 纖維棒耐久性試驗結果 107
5.1 耐鹼 (pH值)試驗結果 107
5.2 紫外線照射試驗結果 111
5.3 溫濕循環變化試驗結果 113
第六章 結論與建議 118
6.1 結論 118
6.2 建議 120
參考文獻 121
論文參考文獻:[1] Nanni, A. (1993). “Flexural Behavior and Design of RC Members Using FRP Reinforcement,” Journal of Structural Engineering, Vol. 119, No. 11, pp. 3344-3359.
[2] Tighiouart, B., Benmokrane, B., and Mukhopadhyaya, P. (1999). “Bond Strength of Glass FRP Rebar Splices in Beams under Static Londing,” Construction and Building Materials, Vol. 13, No. 7, pp. 383-392.
[3] Abdalla, H. A. (2002). “Evaluation of deflection in concrete members reinforced with fibre reinforced polymer (FRP) bars,” Composite Structures, Vol. 56, No. 1, pp. 63-71.
[4] Wegian, F. M., and Abdalla, H. A. (2005). “Shear Capacity of Concrete Beams Reinforced with Fiber Reinforced Polymers,” Composite Structures, Vol. 71, No. 1, pp. 130-138.
[5] Tang, W. C., Balendran, R. V., Nadeem, A., and Leung, H. Y. (2006). “Flexural Strengthening of Reinforced Lightweight Polystyrene Aggregate Concrete Beams with Near-surface Mounted GFRP Bars,” Building and Environment, Vol. 41, No. 10, pp. 1381-1393.
[6] Guadagnini, M., Pilakoutas, K., and Waldron, P. (2006) “Shear Resistance of FRP RC Beams: Experimental Study,” Journal of Composites for Construction, Vol. 10, No. 6, pp. 464-473.
[7] Moon, D. Y., Sim, J., and Oh, H. (2007). “Detailing Considerations on RC Beams Strengthened with CFRP Bars Embedded in Mortar Overlay,” Construction and Building Materials, Vol. 21, No. 8, pp. 1636-1646.
[8] Rteil, A. A., Soudki, K. A., and Topper, T. H. (2007). “Preliminary Experimental Investigation of the Fatigue Bond Behavior of CFRP Confined RC Beams,” Construction and Building Materials, Vol. 21, No. 4, pp. 746-755.
[9] Larraalde, J., and Silva-Rodriguez, R. (1993). “Bond and Slip of FRP Rebars in Concrete,” Journal of Materials in Civil Engineering, Vol. 5, No. 1, pp. 30-40.
[10] Castro, P. F., and Carino, N. J. (1998). “Tensile and nondestructive testing of FRP bars,” Journal of Composites for Construction, Vol. 2, No. 1, pp. 17-26.
[11] Tighiouart, B., Benmokrane, B., and Gao, D. (1998). “Investigation of Bond in Concrete Member with Fibre Reinforced Polymer (FRP) Bars,” Construction and Building Materials, Vol. 12, No. 8, pp. 453-462.
[12] Katz, A., and Berman, N. (2000). “Modeling the Effect of High Temperature on the Bond of FRP Reinforcing Bars to Concrete,” Cement and Concrete Composites, Vol. 22, No. 6, pp. 433-443.
[13] Lorenzis, L. D., Rizzo, A., and Tegola, A. L. (2002). “A Modified Pull-Out Test for Bond of Near-surface Mounted FRP Rods in Concrete,” Composites Part B: Engineering, Vol. 33, No. 8, pp. 589-603.
[14] Zhang, B., and Benmokrane, B. (2002). “Pullout Bond Properties of Fiber-Reinforced Polymer Tendons to Grout,” Journal of Materials in Civil Engineering, Vol. 14, No. 5, pp. 399-408.
[15] Tastani, S. P., and Pantazopoulou, S. J. (2006) “Bond of GFRP Bars in Concrete: Experimental Study and Analytical Interpretation,” Journal of Composites for Construction, Vol. 10, No. 5, pp. 381-391.
[16] Al-Mandil, M. Y., Khilal, M. H., Baluch, M. H., and Azad, A. K. (1990). “Performance of Epoxy-Repaired Concrete under Thermal Cycling,” Cement and Concrete Composites, Vol. 12, No. 1, pp. 47-52.
[17] Tu, L., and Kruger, D. (1996). “Engineering Properties of Epoxy Resins used as Concrete Adhesives,” ACI Materials Journal, Vol. 93, No. 1, pp. 26-35.
[18] Sen, R., Shahawy, M., Sukumar, S., and Rosas, J. (1998). “Durability of Carbon Rretensioned Elements in a Marine Environment,” ACI Structural Journal, Vol. 95, No. 6, pp. 716-724.
[19] Toutanji, H., and Balaguru, P. (1998). “Durability Characteristics of Concrete Columns Wrapped with FRP Tow Sheets,” Journal of Materials in Civil Engineering, Vol. 10, No. 1, pp. 52-57.
[20] Sen, R., Shahawy, M., Sukumar, S., and Rosas, J. (1999). “Durability of Carbon Fiber Reinforced Polymer (CFRP) Pretensioned Elements under Tidal/Thermal Cycles,” ACI Structural Journal, Vol. 96, No. 3, pp. 450-457.
[21] Toutanji, H. A. (1999). “Durability Characteristics of Concrete Columns Confined with Advanced Composite Materials,” Composite Structures, Vol. 44, No. 2, pp. 155-161.
[22] Tannous, F. E., and Saadatmanesh, H. (1999). “Durability of AR Glass Fiber Reinforced Plastic Bars,” Journal of Composites for Construction, Vol. 3, No. 1, pp. 12-19.
[23] Arockiasamy, M., Chidambaram, S., Amer, A., and Shahawy, M. (2000). “Time-Dependent Deformations of Concrete Beams Reinforced with CFRP Bars,” Composites Part B: Engineering, Vol. 31, No. 6, pp. 577-592.
[24] Kshirsagar, S., Lopez-Anido, R. A., and Gupta, R. K. (2000). “Environmental Aging of Fiber-Reinforced Polymer-Wrapped Concrete Cylinders,” ACI Structural Journal, Vol. 97, No. 6, pp. 703-712.
[25] Ben, G., and Kudo, A. (2001). “Weatherability Flexural Properties of CFRP Subjected to Accelerated and Outdoor Exposures,” Composites Science and Technology, Vol. 61, No. 13, pp. 1913-1921.
[26] Grace, N. F., and Singh, S. B. (2005). “Durability Evaluation of Carbon Fiber-Reinforced Polymer Strengthened Concrete Beams: Experimental Study and Design,” ACI Structural Journal, Vol. 102, No. 1, pp. 40-53.
[27] Chen, Y., Davalos, J. F., and Ray, I. (2006). “Durability Prediction for GFRP Reinforcing Bars using Short-Term Data of Accelerated Aging Tests,” Journal of Composites for Construction, Vol. 10, No. 4, pp. 279-286.
[28] 張瑞元 (1997),碳纖維布貼片與水泥混凝土黏結效果之研究,碩士論文,國立中央大學土木研究所,中壢。
[29] 林至聰(1999),碳纖維貼片補強鋼筋混凝土構件之研究,博士論文,國立中央大學土木工程研究所,中壢。
[30] 林瀚洋(2003),纖維加強複材竹節棒之纏繞製作與握裹試驗,碩士論文,私立逢甲大學土木及水利工程研究所,台中。
[31] 梁家銘(2003),纖維強化複合材料加強筋應用於不同強度混凝土在高溫中之握裹力,碩士論文,國立交通大學土木工程研究所,新竹。
[32] 展維賢(2004),碳纖維貼片(CFRP)補強RC樑構件受往復力作用試驗研究,碩士論文,國立台北科技大學土木與防災技術研究所,台北。
[33] 張永毅(2006),碳纖維棒應用於RC梁構件之研究,碩士論文,國立台北科技大學土木與防災技術研究所,台北。
[34] ACI Committee 440.1R-03, “Guide for Design and Construction of Concrete Reinforced with FRP Bars”.
[35] 中央氣象局內部資料。
論文全文使用權限:同意授權於2008-08-13起公開