現在位置首頁 > 博碩士論文 > 詳目
  • 同意授權
論文中文名稱:核電廠電氣盤體之振動台試驗與模擬分析 [以論文名稱查詢館藏系統]
論文英文名稱:The shaking table test and numerical simulation of MCC cabinet in Nuclear Power Plant [以論文名稱查詢館藏系統]
院校名稱:臺北科技大學
學院名稱:工程學院
系所名稱:土木與防災研究所
畢業學年度:101
出版年度:102
中文姓名:周佩芳
英文姓名:Pei-Fung Chou
研究生學號:100428006
學位類別:碩士
語文別:中文
口試日期:2013-07-10
論文頁數:179
指導教授中文名:廖文義
指導教授英文名:Wen-I Lian
口試委員中文名:柴駿甫;黃尹男;許丁友
中文關鍵詞:MCC電氣盤體盤內反應譜動力放大因子數值模擬
英文關鍵詞:MCC cabinetIn-cabinet response spectrumNumerical mode
論文中文摘要:臺灣核能電廠運轉至今已有一段時間,期間核能電廠電氣盤體之盤內設備物需多次更新汰換及維護。本研究以臺灣某核能電廠餘熱移除系統C串(RHR-C,Residual Heat Removal)之馬達控制中心(MCC,Motor control center)電氣盤體機櫃作為研究對象,藉由振動台試驗了解MCC電氣盤體於受震下之動力反應與結構特性,試驗目的主要為探討以下項目:(一)、空櫃與櫃內含設備物之動力反應特性;(二)、不同量測位置(如:機櫃內外部及不同高程處之反應比較);(三)輸入波強度之影響;(四)櫃內有無抽屜型式之機櫃動力反應;(五)不同形式輸入地震波(如:主要涵蓋頻率範圍不同)對機櫃行為之影響。
除了探討臺灣核能電廠MCC電氣盤體之結構動力特性與盤內反應,另依據試驗機櫃之材料性質及尺寸進行電氣盤體動力反應之數值模擬,研究採用SAP2000分析軟體進行模型建立及動態反應模擬,其目的為模擬真實機櫃受震時之反應,並可提供往後參數分析及多盤體機櫃模擬之參考。
論文英文摘要:In this study, a seismic behavior of the electrical cabinet in Nuclear Power Plants (NPPs) was evaluated by the shaking table test. A Residual Heat Removal System of C loop (RHR-C) for the Motor Control Center (MCC) cabinet was selected by Taiwan Nuclear Power Plant of FSAR report, and a real MCC cabinet for the Taiwan Nuclear Power Plant site was built same full size. In addition, five variable conditions and the associated effects on the structural characteristics of MCCs were specified and discussed: (1) original bare cabinets or the ones with additional mass blocks simulating in-cabinet equipment, (2) different measurement locations, (3) different input shaking levels, (4) cabinets with or without drawers, and (5) different types of required response spectrum (RRS).

In order to understand the dynamic characteristics and In-cabinet response spectrum of the MCCs. According to the tensile testing can obtain the material property and dimension of cabinets to doing the numerical simulation. Using the SAP2000 analysis software to estimate the numerical model and simulate the dynamic response. The purpose of the numerical model and estimate that simulate real cabinet on the earthquake, and providing future parametric analysis and multi-cabinet simulation.
論文目次:目錄
中文摘要 I
ABSTRACT II
誌 謝 III
目 錄 IV
表目錄 VI
圖目錄 VIII
第一章 緒論 1
1.1前言 1
1.2研究動機與目的 1
1.2.1研究動機 1
1.2.2研究目的 2
1.3文獻回顧 2
1.3.1國外電氣盤體振動台試驗-【1】2
1.3.2盤內反應譜相關文獻 3
1.3.2.1國家技術信息服務NTiS(NUREG CR-5203)-【2】3
1.3.2.2美國能源部耐震評估程序-【3】5
1.3.2.3盤體動力放大因子評估研究 6
1.3.2.4盤內反應譜相關研究 7
1.3.3其他文獻 9
1.4研究內容 10
第二章 實驗研究 13
2.1核能電廠電氣盤體 13
2.2實驗設備與結構 14
2.3實驗規劃與流程 15
2.3.1實驗規劃 15
2.3.2實驗流程 15
2.4實驗量測裝置 17
2.4.1加速度規 18
2.4.2磁環式位移計 18
第三章 實驗結果分析 35
3.1機櫃之動力特性 35
3.1.1機櫃自然頻率 35
3.1.2機櫃阻尼比 37
3.2加速度歷時反應 38
3.3位移歷時反應 45
第四章 盤內反應譜分析與動力放大因子 99
4.1前言 99
4.2空櫃或質量櫃之影響 99
4.2.1空櫃與含設備物機櫃之反應譜 100
4.2.2空櫃與含設備物機櫃之放大因子 100
4.3量測點位影響 101
4.3.1不同高程處之盤內反應譜 101
4.3.2不同高程處之盤內放大因子 101
4.3.3機櫃內部與外部之反應譜比較 102
4.3.4機櫃內部與外部之放大因子比較 102
4.4輸入波強度影響 103
4.4.1 不同地震強度之盤內反應譜比較 103
4.4.2不同地震強度之放大因子 104
4.5不同輸入波之影響 105
4.5.1 不同地震波之反應譜比較 105
4.5.2 不同地震波之放大因子比較 106
4.6動力放大因子總結 106
4.7小結 107
第五章 數值模擬分析 142
5.1前言 142
5.2數值模型 142
5.3數值模擬分析結果 145
5.4小結 146
第六章 結論與建議 175
6.1結論 175
6.2未來研究方向 176
參考文獻 177
論文參考文獻:參考文獻
[1]Min Kyu Kim , In-Kil Choi , Jeong-Moon Seo ,Nuclear Engineering and Design, Nuclear Engineering and Design 341-355,2012.
[2]NURGE/CR-5203, Dynamic Amplification of Electrical Cabinets. U.S. National Technical Information Service, June 1988.
[3]U.S. Department of Energy, DOE/EH-0545, Seismic evaluation procedure for equipment in U.S. Department of Energy facilities, U.S. Department of Energy, USA, March 1997.
[4]EPRI Report NP-7148, Procedure for Evaluating Nuclear Power Plant Relay Seismic Functionality, Electric Power Research Institute, Palo Alto, California, prepared by MPR Associates,Inc.,1990.
[5]EPRI Report NP-7146-SL,Development of In-Cabinet Amplified Response Spectra for Electrical Benchboards and Panels, Electric Power Research Institute, Palo Alto, California, prepared by Stevenson &Associates,Inc.,1990.
[6]K.L. Merz and P. Ibanez, Guidelines for estimation of cabinet dynamic amplification, ANCO Engineers, Inc., Nuclear Engineering and Design vol. 123, p.p. 247-255, North-Holland, 1990.
[7]T. Y. Chang, Seismic qualification of equipment in operating nuclear power plants, USNRE, NUREG-1030, 1985.
[8]Shi Z.T., A simplified approach to generate in-cabinet amplified response spectrum , Raytheon Engineers and Constructors, Transactions of the 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT 14), Lyon, France, August 17-22, 1997.
[9]Abhinav Gupta, S.K. Rustogi, Ajaya K. Gupta, Ritz vector approach for evaluating incabinet response spectra, Center for Nuclear Power Plant Structures, Equipment and Piping, North Carolina State University, Nuclear Engineering and Design vol. 190, p.p. 255–272, 1999.
[10]Jianfeng Yang, Abhinav Gupta, INCABS: A Computer Program for Evaluating Incabinet Spectra, Transactions, SMiRT 16, Washington DC, August, 2001.
[11]IEEE Std. 344™-2004, IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations, IEEE-SA Standards Board, 2004.
[12]AC156, Acceptance Criteria for Seismic Qualification by Shake-table Testing of Nonstructural Components and Systems, ICC Evaluation Service inc., 2007.
[13]GR-63-CORE, Network Equipment Building System (NEBS) Requirements: Physical Protection, Issue2, April 2002.
[14]IEEE Std. 693™, IEEE Recommended Practice for Seismic Design of Substations, IEEE-SA Standards Board, 2005.
[15]Taiwan power Company, 1998. Lungmen project fourth nuclear power plant units 1&2, Seismic Analysis of the Reactor Buildings, appendix AD: Enveloped Floor Acceleration Response Spectra for OBE, Taiwan: Taiwan power Company.
[16]中國國家標準(CNS)總號2112類別G2014,”金屬材料拉伸試驗試片”,經濟部標準檢驗局,2000.
[17]柴駿甫、林凡茹,「非結構耐震性能修復與試驗準則之研究」,台北,國家地震工程研究中心報告,編號NCREE-10-006,2010
[18]柴駿甫、林凡茹、賴姿妤、林震宇、周佩芳、黃振綱,「核能電廠-電氣盤體振動台實驗研究」,國家地震工程研究中心報告,編號NCERR-12-006,2012
[19]柴駿甫、賴姿妤、林凡茹、周佩芳、陳明毅,「大型安全相關核能設備縮尺試驗驗證分析報告」,科發基金補助計畫成果報告,2012
[20]聯邦工程顧問股份有限公司,李森枏,「SAP2000入門與工程上之應用」,台北,科技圖書公司,2002
[21]聯邦工程顧問股份有限公司,李森枏,「SAP2000結構設計實(V8&V9)」,台北,科技圖書公司,2005
[22]中國建築標準設計研究院,「SAP2000中文版使用指南」,北京,金土木軟件技術有限公司,2006
論文全文使用權限:同意授權於2017-08-26起公開