現在位置首頁 > 分類瀏覽 > 會議論文
    工程學院材料及資源工程系,年份選擇:
    • 134筆資料,第1/7
    • 第一頁
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 最後一頁
    • ,每頁顯示
    • 20
    • 50
    • 100
    序號主要題名作者姓名發行日期
    1無電鍍法製備奈米 α-Al2O3/Ni-P 核-殼結構複合粉體古祿榮; 盧錫全; 王錫福; 徐永富2007-11
    2Formation of Ni-Cu-Ag Termination Using Metallo-Organic Decomposition (MOD) Technology at Low-TemperLin, Hong-Ching; Wang, Sea-Fue; Tzeng, Ya-Chung; Hung, Ying-Chang; Lu, Chun-An; Lin, Pang2006-09
    3Production geopolymer materials by coal fly ashWang, J. W.; Cheng, T. W.2003-11
    4Fire-resistant geopolymer produced by waste serpentine cuttingCheng, Ta-Wui2003-11
    5The landslide mechanism of a dip-slope at HeryaLin, M.-L.; Lin, H.-H.; Chi, C.-C.; Fei, L.-Y.; Yu, B.-S.; Liao, R.-T.; Lin, S.-C.; Wang, K.-L.2009-04
    6Separation of Metal Impurities from Silicon Sawing WasteTsai, Tzu-Hsuan; Wen, Fu-Lin2012-02
    7利用赤銅鐵礦化合物CuCrO2進行金屬照光回收陳儀安; 邱德威; 謝昇樺2012-11
    8Fabrication of transparent CuCrO2:Mg/ZnO p-n junctions prepared by RF sputtering on ITO glass substrChen, L. F.; Wu, M. S.; Shih, W. C.; Chiu, T. W.; Wang, Y. P.2012-11
    9CuCrO2奈米粉末於氮氣及空氣下退火之形貌研究馮亦偉; 邱德威2012-11
    10脈衝電壓對電漿化學氣相沉積法蒸鍍DLC薄膜於氮氧化處理AISI H13工具鋼之影唐德謙; 李俊毅; 張世賢2012-11
    11真空燒結與熱均壓處理對Ni65Cr35合金靶材微結構及其性質之影響林峻丞; 林漢偉; 陳敬騏; 張世賢2012-11
    12The Impact Toughness and Fracture Behavior of Ni-containing Powder Metal SteelsWu, Ming-Wei; Chang, Shih-Hsien; Shu, Guo-Jiun2012-07
    13The Effects of Adding TiC Powders to VANADIS 4 Tool Steel by HIP TreatmentChang, Shih-Hsien; Liu, Chung-Ming; Chen, Jhewn-Kuang; Tang, Tzu-Piao2012-01
    14都市垃圾焚化飛灰水洗去除氯化物之條件探討柯明賢; 簡呈至; 陳盈良2012-11
    15台灣資源回收管理及再生產業發展之現況與展望柯明賢2012-08
    16Microstructures and Dielectric Properties of MgTiO3 Thick Film Prepared Using Aerosol Deposition MetWu, Yu-Chuan; Teng, Li-Gia; Wang, Sea-Fue2012-06
    17La1-xBaxGa0.8Mg0.2O3-d solid electrolyte ceramic: electrical performance as functions of doping Ba aWu, Yu C.; Huang, Jen W.; Chuag, Wen L.2012-05
    18Synthesis of the mesoporous TiO2 film for hydroxyapatite precipitationTsai, Shin-Hui; Yang, Yung-Chin2012-06
    19Performance of CrN and CrAlSiN coated H13 tool steels in molten A380 aluminum alloyWu, Chih-Chung; Lee, Jyh-Wei; Wang,Chaur-Jeng; Kuo, Yu-Chu; Yang, Yung-Chin2012-01
    20Influences of the Anode Materials and Surface Properties on the Microbial Fuel CellsHuang, Chih-Song; Wang, Chin-Tsan; Yang, Yung-Chin2012-01
    • 134筆資料,第1/7
    • 第一頁
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 最後一頁
    • ,每頁顯示
    • 20
    • 50
    • 100